Home » Here’s How Race Cars Change Fluids Mid-Race Without Spraying Hot Liquids Everywhere

Here’s How Race Cars Change Fluids Mid-Race Without Spraying Hot Liquids Everywhere

Fast Fill Corvette Ts2
ADVERTISEMENT

You’re in the pits at a major world-class endurance race. Your team’s car is in the lead with a few hours left to run. Imagine it. You’re focused, but the slightest hint of anticipation and giddiness is lurking at the edge of your pscyhe. Just then, you hear a call over the radio. Instantly, there’s a pit in your stomach, your palms sweaty. Oil pressure just dropped over the last few laps. It seems like there’s a leak. This could ruin everything… but your team came prepared.

In motorsport, planning for negative eventualities often makes the difference between trophies and could-have-beens. Plenty can go wrong with a race car, particularly over the extended length of a hardcore endurance race. For that reason, teams plan the quickest possible fixes for all sorts of problems. When it comes to fluid loss, having some quick-fill ports accessible on the race car can keep it in the fight when it would otherwise be a steaming, broken mess at the side of the racetrack.

Vidframe Min Top
Vidframe Min Bottom

In a recent Facebook post, Pratt Miller Motorsports gave us a direct insight into how it fits fill ports on its race cars. Formerly known as Corvette Racing, the team is one of the most successful American outfits in sports car racing. It’s currently campaigning a Chevrolet Corvette Z06 GT3.R in the IMSA SportsCar championship. The post gives us a look at the door sill of the race car. There, we see ports for topping up coolant, engine oil, and gearbox oil. A loss of any one of these fluids could easily see the car retiring from the race, and likely with expensive damage to boot.

Fluidports
Fluid fill ports used on the Pratt Miller Motorsports Corvette. There’s a small risk of mixing up the ports (assuming those connectors are all the same size) and ruining a race… something you’d want to think about.

This technology isn’t just limited to the Pratt Miller Motorsports cars, though. I spoke to IMSA race mechanic and auto writer Bozi Tatarevic to get the low down on how common these systems are in motorsport, and how they’re used. “I have seen those ports in IMSA, and used them on the Lexus [RCF GT3] to fill oil during a pit stop,” explains Tatarevic. “Typically, these ports are placed around the car or some require the hood to be pulled off to be accessible.”

In the case of the installation on the Corvette, he notes that location can matter, depending on how your race goes.  “The notable thing with the Corvette implementation is that they were all placed in one spot that is easily accessible,” he says. “That can be a benefit from a time perspective but it does come with the drawback of losing access to all of your fluid fill points if the car sustains damage in that section.” In the case of the Lexus RCF GT3, which Tatarevic worked as a crew member, the oil fill port was located at the base of the windshield.

ADVERTISEMENT

In the 2021 pitstop seen above, you can see Tatarevic topping up the race car in seconds during a stop. That’s thanks to the use of the Subek Oilstick. It’s a tank of oil that is pressurized at 87 psi (6 bar). The tank has a total capacity of 2.32 quarts (2.2 liters), but in actual use, it’s designed to be filled up with 1.9 quarts (1.8 liters) of oil, with the rest of the internal space used for air. The device is pressurized for fast delivery of oil into the vehicle’s dry sump oiling system. This is achieved with compressed air via a Schrader valve in the base. It’s the same kind of valve you’d find on a bike tire. The oil itself is delivered to the car via an F2K or LiTec valve, depending on what the team in question wishes to use. These quick disconnect fittings are designed for “dry break”, meaning the tank nor the vehicle squirts oil on disconnect.

Rect1225
How a quick-release fill port can be integrated into a dry sump oiling system, as seen on sports car engines. When filling, a device like the Sobek Oilstick is coupled to the quick release fitting to inject oil into the reservoir under pressure to top it up in seconds. Similar systems work for refilling gearbox oil and engine coolant. Credit: Lewin Day, modified from public domain diagram from Arnero.
Z B 1000 1043 Oilstick Magnum F2k 1
Quick-fill pressurized oil bottles like the Sobek Oilstick Magnum are so obscure and task-specific that they’re virtually impossible to find online unless you already know they exist. Image credit: Subek

Subek also manufacturers systems for refilling cooling systems in a pinch under the name Waterpick. These systems allow topping off coolant without spillage. Often, refilling coolant requires the delivery of a great deal more fluid than with engine or gearbox lubricants; Subek’s systems are designed to deliver anywhere from 7.4 quarts to 13.7 quarts in the Waterpick line. They force water into a hot cooling system under pressure, using CPC or Stäubli couplings to do so without spraying hot coolant or steam everywhere.

As you might imagine, race teams don’t just put these systems on for a laugh. They can make a very real difference in results. Tatarevic notes the recent case of Meyer Shank Racing winning the 2023 24 Hours of Daytona, formally known as the Rolex 24.  The team’s Acura ARX-06 had a gearbox oil leak that came to light mid-race. Thankfully, the team was able to top up the car and keep the gearbox operational, all the way to the finish.

Both Meyer Shank Racing and fellow Acura racers Wayne Taylor Racing also had to flush engine oil during the race, due to biofuel used compromising the engine oil in short order. “Their oil was getting diluted by fuel, if I remember correctly, so they had to top off on almost every pit stop,” says Tatarevic. In the case of Wayne Taylor Racing, they actually lost time when they had to fix an oil filler tube that broke during the race. Usually, though, the systems are just fitted as insurance, Tatarevic explains. Most race cars are designed to ideally run for a full race distance without replacing their main fluids.

ADVERTISEMENT

Indeed, it’s for similar reasons of insurance that Formula 1 teams have fittings that allow air pressure to be topped up at pitstops. Compressed air is used for the pneumatic valve springs in Formula 1 engines, and occasionally teams can have problems with leaks or pressure loss mid-race. Indeed, in the 2023 Bahrain Grand Prix, McLaren’s Lando Norris had to pit a total of six times to recharge his engine’s air system due to an ongoing leak.

 

Screenshot 2024 01 15 163838
Stabuli is a manufacturer which manufacturers quickfit connectors commonly used for refuelling or oil top-ups, as seen in the video above regarding endurance racing motorcycles. 

These rapid-refill systems are primarily seen on high-dollar racecars and motorbikes. However, amateur racers have found great success pursuing the same idea. MotoIQ writer and long-time hero of the site Dave Coleman credited a garden sprayer with winning two championships all the way back in 2010. It all started with his Nissan Sentra SE-R rally car, which had a head problem. The regular loss of coolant saw engine temperatures spiking. Worse, it was difficult and dangerous to try and refill the cooling system at breaks between stages while it was still hot. Opening it under those conditions would see the coolant boiling over and spraying everywhere. Waiting for it to cool wasn’t an option in the limited time available. He needed a way to refill the cooling system while it was still hot and pressurized.The solution was a humble garden sprayer. Coleman realized the radiator cap on the Sentra was built to handle up to 18.5 psi. At pressures above that, the cap opens and blows coolant into the overflow bottle. All he had to do was put coolant into the garden sprayer, charge it above 18.5 psi, and hook it into the still-pressurized cooling system. He decided on air tool fittings, which are able to handle over 100 psi without breaking a sweat.

A quick-release fitting was welded into a piece of pipe and spliced into the top radiator hose, allowing water to be pumped in before the radiator. This allows water pumped in from the sprayer to heat up with the rest of the coolant before reaching the engine, reducing the risk of thermal shock causing damage. On the garden sprayer, a matching fitting and a ball valve were fitted. The sprayer could then be pumped up by hand to around 30 psi or so, hooked up to the fitting on the car, and the ball valve opened. The fluid in the sprayer would then be forced into the cooling system, topping it up. Coolant will flow into the overflow bottle when the system is full. If the initial charge in the garden sprayer doesn’t fill the system enough, a few extra hand pumps generally got the system to full.

The system later served Coleman well as he attempted to win the 2010 24 Hours of LeMons championship with the Frankenmiata and the Eyesore Racing team. In its final race, the car swallowed a full 3 quarts of coolant at every pitstop on its way to second place at the Buttonwillow event. That podium finish was enough to clinch the championship for Eyesore Racing.

ADVERTISEMENT

Fundamentally, it all comes back to that old racing adage: to finish first, first you must finish. Having gear that lets you keep a car full of fluids with a minimum penalty in time spent in the pits can make a big difference in this regard. It’s always going to be of greatest importance in endurance racing, where the hours are long and there’s so much more scope for things to go wrong. In any case, it’s very much a case of preparedness. You’d rather have it and not need it, then need it and not have it. Such a simple thing as a convenient fill port can make the difference between race victories and championships, or lamenting what could have been.

Image credits: Sobek, Lewin Day, Pratt Miller Racing

Share on facebook
Facebook
Share on whatsapp
WhatsApp
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on reddit
Reddit
Subscribe
Notify of
13 Comments
Inline Feedbacks
View all comments
Theotherotter
Theotherotter
9 months ago

Great article – I’m also an engineer, and I learned things! 🙂 Pratt & Miller could mitigate the risk of using the wrong fluid fill port on the Corvette by color-coding everything – different color for each fill port and matching color on the respective fill nozzles.

Waremon0
Waremon0
9 months ago

Would love to see more of Bozi on The Autopian! Race tech and innovation is awesome and this article was a joy to read.

Freelivin2713
Freelivin2713
9 months ago

“His palms are sweaty, knees weak, arms are heavy
There’s vomit on his sweater already, mom’s spaghetti”
-Eminem

Chronometric
Chronometric
9 months ago

Another application of this tech is brake changes. Endurance racing cars sometimes need to change the brake pads. If you have ever tried this with hot smoking brakes you will understand why swapping the entire caliper set is a better and faster choice.

Arch Duke Maxyenko
Arch Duke Maxyenko
9 months ago

You might want to change the title, to Here’s How Race Cars Change Top-Off Fluids Mid-Race Without Spraying Hot Liquids EverywhereThey’re trying not to change fluids mid-race

Black Peter
Black Peter
9 months ago

Agreed, I was also expecting so fancy bubble gum used to fix leaks… but I guess they just let fluids leak unless/until it becomes black flag bad?

Jack Trade
Jack Trade
9 months ago

Related, I’ve noticed for series that allow refueling, only IndyCar seems to mandate spraying what I’m assuming is flame retardant on the fill port. I always enjoy when they squirt it from a distance just as the car tears out of the pit box.

Is this b/c of the engine location, or them being extra careful, or ?

Bozi Tatarevic
Bozi Tatarevic
9 months ago
Reply to  Jack Trade

Partly engine and turbocharger location but it is actually effective there because they use ethanol, which can be diluted with water since it is not a petroleum derivative.

Chronometric
Chronometric
9 months ago
Reply to  Jack Trade

I believe it is because they use alcohol fuel which burns with an invisible flame. They are trying to make sure it is all washed off because they can’t tell if it catches on fire.

Last edited 9 months ago by Chronometric
Robert M. Graham
Robert M. Graham
9 months ago
Reply to  Jack Trade

It’s actually just water. It dilutes the alcohol fuel to prevent fires.

Goose
Goose
9 months ago

Lots of racing series have limits on how much fuel you can burn, do any have regulations on how much oil you can burn, blow by, or somehow consume/lose during race?

Bozi Tatarevic
Bozi Tatarevic
9 months ago
Reply to  Goose

There are no limits in IMSA or most sports car series as far as I am aware which is mostly likely due to the variety of engines used and how they all deal with oil differently.

SarlaccRoadster
SarlaccRoadster
9 months ago
Reply to  Goose

4 years ago Ferrari got in trouble in F1 for burning intercooler oil, which the FIA saw as a workaround the fuel limits.

Last edited 9 months ago by SarlaccRoadster
13
0
Would love your thoughts, please comment.x
()
x